GATES, FENCING & HARDWARE
- 1.1m high with lengths ranging from 1.0m to 3.6m
- H3 treated 100mm x 25mm timber.
- Rails spaced 100mm apart.
We make gates for all your requirements, fancy gates for main entrance, gates for sheep or cattle yards or drafting gates, which are made in heavier timber (i.e. 150mm x 50mm, 125mm x 32mm) - your choice or give us your specs and we can make to order.
- Pipe & Netting Gates:
Economy Netting 1.1m(H) x 3.05 - 4.25m(W)
Deer Netting 3.66 x 1550, 3.05 x 1900, 3.66 x 1900, 4.25 x 1900 - Light Barred Gates:
Vertical barred 1.06m
Brumby 1.85 - 4.25m
Highlander 3.05 - 4.25m
Chief 3.05 - 4.25m - Heavy Barred Gates:
2.1 - 4.25m
- Latches
- Hinge Straps
- Gudgeons: Screw, Drive In, Square Shank, Lock Through, Through Post
- Coach Bolts
- Washers
1.8 - 3.0m length
ROUNDS
#1: 115 - 140mm Ø
#2: 90 - 115mm Ø
#3: 65 - 90mm Ø
½ ROUNDS
#1: 115 - 140mm Ø
#2: 90 - 115mm Ø
Capping: 4.8m, 6m
¼ ROUNDS
#1: 115 - 140mm Ø
#2: 90 - 115mm Ø
#3: 65 - 90mm Ø
OTHER
100mm x 100mm square, 1.2m - 3.6m lengths
4.2 - 6m length
150 - 175mm SED
175 - 200mm SED
1.8 - 3.6m length
#1: 200 - 225mm Ø
#2: 175 - 200mm Ø
#3: 150 - 175mm Ø
Rough sawn. Variety of sizes and lengths.
PLY
2.4m x 1.2m sheet size
TREATED PLY
7mm up to 25mm thickness
UNTREATED PLY
17mm thickness
FENCING PALINGS
H3, 150mm x 25mm rough sawn, 1.2m, 1.5m 1.8m lengths.
- Barbed post
- Hot dipped barb
- Plain
- Bright H/T
- Stainless Steel
- Barbed batten
- Batten
- Collated batten
- No 8, 10, 12½ gauge
(2.5mm, 3.15mm, 4mm) - Barbed
- Braided
- Reverse twist
- Tie wire
- Chainlink netting
- Aviary netting
- Fencing spade
- Post hole shovel
- Post hole rammer
- Chisels
- Fencing pliers
- Wire cutters
- Crimps
- Chain diverter
- Stay holders
- Chain & grab assembly
- Wire/chain strainers
- Ratchet Handle
- Anchor chain
- Wire tension gauge, meter
- Easy wire puller
- 4 arm wire jenny
- 3 arm folding wire jenny (adjustable)
- Standard lifter, driver
- Adjustable batten clamp
- Batten holder
- Staple pick
- Galvanised F/H
- Galvanised F/H - vineyard
- Galvanised F/H - insulated
- Galvanised F/H - sq twist
- Floor/decking
- Plasterboard clouts
- Spring head roof
- Bracket nails
- Spiral paling nails
- Galvanised spikes
- T-hinges
- Pad bolts
- Wood screws
- Gutterbolts
- Mesh
- Cement
- Concrete mix
- Jack saw blades
- Weed Wakka
- Electrical gear: end insulators etc, aluminium underground cable, cut out switch.
- Line clamps
- In-line strainers
- Stay brackets
- Galv ridging
- X Cell Chain
- Split Link
- Snap Hook
- Battens & Pegs: Wide range to choose from: Pine, treated or untreated.
- Footing Blocks
- Tomato Stakes
- Stakes for Real Estate Signs
- Citrus Stakes
- Deer netting
- Sheep netting
- Nail plates
- Hangers
- Strip brace
- Wire dogs 'Z' nails
- Girt plates